scripting

PVS Target Device Update Script — Supplemental File, WindowsUpdate.cmd / updatehfs.vbs

2015-03-20
/ / /

These are two scripts we use to update Windows on our PVS target devices using our PVS target device update script:

WindowsUpdate.cmd

updatehf.vbs — please note there is an error in this script. Because of formatting with HTML, you’ll need to search and replace “..script” with “script”

 

Read More

Citrix PVS Target Device Update script

2015-03-20
/ / /

Saman and I have created a Citrix PVS update script we use and run each time we update a PVS target device.  This script has been generated after finding numerous issues that needed to be fixed after updating a PVS image.  It includes fixes to issues with AppV5, PVS, XenApp 6.5, etc.

We also made the script to be able to be run automatically by accepting command-line parameters so that we can use it to do Windows Updates with PVS’s automatic vDisk update feature.

I’ve removed email addresses and some specific application fixes that would only be relevant to our environment.  So I’ve tried to generalize this the best I can.  We tried to make this script dynamic so if you have a vDisk without AppV it will skip the features that require AppV, skip 64bit only features, etc.

I will post the supplemental scripts in more posts.

 

Read More

AppV 5 – Measuring RegistryStaging load times

2014-12-14
/ / /

Per my previous posting, I have an issue where the AppVClient.exe consumes significant CPU resources upon application launch.  From a Microsoft forum where another member did some further investigation, he discovered that the slowness and delayed launch times are related to registry staging.  To confirm and measure the impact of registry staging I wrote a script that measures the length of time it takes to finish registry staging for all AppV5 applications on your computer/server.

What this script does is iterate through all your AppV5 applications and then loads a cmd.exe with the AppV environment.  It then checks for the RegistryStagingFinished registry key, and once it is found, it moves on to the next program.  It records all this information than exports it as a CSV file.

By utilizing this script as a AppV prelaunch/startup script we can optimize our users first application startup times and reduce CPU utilization of first-run applications.

Read More

AppV 5 first launch application performance

2014-11-17
/ / /

Our AppV 5 environment is a full infrastructure implementation.  We utilize the management/streaming server to pull the applications down to our Citrix XenApp 6.5 servers.  Our XenApp servers are Citrix PVS servers, we enable the Cache on RAM with disk overflow and the write-cache intermediate mode.  To maximize CPU performance we have our ESXi hosts set to maximum performance and disable power management in the BIOS of the hosts.  We have some applications that are very latency sensitive and the switching of power states on the ESXi hosts have caused performance degradation so we have power management disabled.  We have setup our PVS servers with the secondary D: WriteCache disk where we fully mount the AppV 5 packages, removing the streaming latency that going over a network may add.

Because of some performance concerns with the Shared Content Store (SCS) I was tasked with coming up with a way of determining if there is a performance impact of switching from fully mounted applications.  In order to determine the impact my plan was to measure a baseline based on disk performance.  Our SMB share that we are storing our .appv packages actually has the same performance as the local disk.  Since AppV packages are immutable, the only performance consideration we should be concerned is READ performance from the SMB share compared to the local disk.  The writes occur in the %userprofile%appdatavfs which is stored on the C:\ drive.  The Cache to RAM with disk overflow feature would ensure that write performance into those directories are fast and should be near instant.

With that said, I’ve used the diskspd.exe application (new from Microsoft) to measure performance. AppV 5 utilizes a 64KB allocation size so that’s what we’ll set as our -b value.  We’ll measure Latency statistics comparing local disk to the file share as well.

D:\diskspd.exe -c1G -b64K -L -d60 D:test.dat
D:\diskspd.exe -c1G -b64K -L -d60 \citrixnas01ctx_images_testtest.dat

Results:
D:\

SMB share:

 

Performance of the SMB share vs local disk:
MB/s: 96%
IO per s: 96%
AvgLat: 46%

Based on these results, the local disk appears to be nearly identical to the SMB share with the average latency a little more than half on the local disk.  Although it’s half on average, we are still in the sub 1ms time range which is significantly faster than you could get with a physical server with a single local disk.

The next test I have is launching an application and getting to the splash screen to see how long it takes to load.  For this test I’ve written a AutoIt script that takes two parameters, the name of the program to launch and the window title to monitor for.

I setup a cmd file with my program (Epic) because it takes some parameters prior to launch.  I then pointed my timer application at it.

The results (with SCS):

The columns are Time Completed, Duration (in ms), Window to check for, Command executed.

After doing a Net Stop AppvClient / Net Start Appclient and then executing our AppV application it takes 196 seconds to start the application.  After that initial launch it takes 12-15 seconds to start.  Something is really dragging our initial application launch time down.  I’ve found if I stop/start the service I need to do a add/publish via Powershell for that application to reduce the 196 seconds.  This then takes first launch down to 48 seconds.  This is how long is takes to start the same application after a system restart:

First launch time after restart is 48 seconds then subsequent launches are essentially identical to just the stop/start appvclient service + add/publish.  Which makes sense as our AppV5_Data_Precache script does a add/publish.  Evidently, we’re going to have to go further into AppV to understand what’s causing it to take so long.  To start, I’m going to detail our package a bit.

The application I’m testing this with is Epic.  It’s a huge application.  AppXManifest is 72MB, FilesystemMetaData.xml is 1.7MB, Registry.Dat is 62MB.

It contains 22,000 files totalling around 2GB in size.

When AppV is “launching” the application for the first time it starts consuming memory and CPU for the 196 seconds that it’s launching, peaking at nearly 600MB RAM and 50% CPU (though most of the time it’s peaked at 25% CPU).

AppV utilization before application launch

 

Start of application launch

 

Peak during launch
Application launched

The AppV Debug logs do not give a whole lot of info as to what AppVClient.exe is doing during this time.  Most of the logs show the application “start” as they setup their components, and when the application has launched.  Almost all the logs show the first second or two of application launch and the last second or two before the GUI.

I launched the application at 12:36:24, it finally displayed the GUI at 12:39:38

The only log that shows data during the entire time is the SHARED PERFORMANCE log.  Unfortunately, the log is undecipherable to me.

Lots of PreCreate, PreCleanup, PreAcquireForSection with no relevant data.

Perfmon.exe doesn’t do a whole lot better with large gaps between file/process/network accesses:

What is it doing between 1:17:41 and 1:18:29?  CPU is pegged but no disk activity

Showing Registry accesses also shows huge gaps between the AppVClient.exe process accessing the system.

Registry information still shows huge gaps in time where the AppVClient.exe is processing

So I’m not sure what the hold up is with regard to the delay for this application.  None of the usual tools I use to monitor performance is giving me any hints or indications of why it’s delaying launch.

First launch delay when stopping/restarting AppV service.
Total time is 221s for the first launch, 15s for subsequent launches

 

 

First launch delay when starting application after a full system restart.
Total time is 38s for first launch then 13s for subsequent launches.

 

Read More

Unable to launch /appvve switch via XenApp 6.5

2014-10-16
/ / /

It appears you can’t launch an AppV environment around an application with the /appvve switch as Microsoft automatically strips the /appvve switch OR because icast.exe freaks out.

I have found an alternative method though:

This will launch a cmd.exe window in the virtual environment in citrix with the passed .exe (cmd.exe in this example).

Dan mentioned another, less character way:

 

Read More

Powershell script to update some sysinternals tools and wireshark

2014-09-04
/ / /
 

Read More

Quick one-liner to change vDisk on devices

2014-07-16
/ / /
Read More

Call PowerShell from CMD.exe and a application-prelaunch script that logs the user off when the application is exited.

2014-07-15
/ / /
I should comment this later, for now, this is the whole script.

Read More

Extend disk space on a VMWare PVS system

2014-07-14
/ / /